[Elecraft] K3-Data mode RTTY

[W0MU Mike Fatchett]

For FSK?

Mike W0MU

W0MU-1 CC Cluster w0mu.net


On 4/16/2012 9:26 PM, iain macdonnell - N6ML wrote:
> Mike,
>
> Were you using the K3's internal RTTY encoder/decoder? If you were
> using software on a computer, the baud rate setting on the K3 is
> irrelevant.
>
> 73,
>
>       ~iain / N6ML
>
>
> PS. Tnx agn for the J6 QSOs :)
>
>
>
> On Mon, Apr 16, 2012 at 8:19 PM, W0MU Mike Fatchett<w0mu at w0mu.com>  wrote:
>> That could be it but this rig was used at J6 and I made a bunch of RTTY
>> contacts from down there and I doubt that they were made at 75 baud but
>> hey who knows...
>>
>> Mike W0MU
>>
>> W0MU-1 CC Cluster w0mu.net
>>
>>
>> On 4/16/2012 7:56 PM, Ed Muns wrote:
>>> Yes, that is usually the problem.  It happens to me all the time and I still
>>> sometimes forget why!
>>>
>>> 73,
>>> Ed - W0YK
>>> -------------------------
>>> Ed Muns
>>> www.w0yk.com
>>>
>>>
>>>
>>> Bob K6XX replied:
>>>> This parameter is saved separately by band. Could that be the problem?
>>>> On 4/16/2012 1:58 PM, W0MU Mike Fatchett wrote:
>>>>> I keep setting the Data MD to 45 baud fsk and somehow the radio has
>>>>> gone back to 75 baud a couple of times on it's own.  Anyone
>>>> else seen this?
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html