[Elecraft] P3 Frequency

[Alan Bloom]

You may have to manually set the K3 to 38400 baud ("RS-232" in the
CONFIG menu).  I found out that the P3's auto-baud routine was broken in
version 1.06 (and subsequent) firmware.  It will be fixed in the next
update.

Alan N1AL


On Mon, 2012-04-16 at 11:17 -0700, Bill Wiehe wrote:
> Checked the cable and nothing appears to be wrong.
> Bill - W0BBI
>  
> 
> ________________________________
>  From: Bill Wiehe <bw396ss at yahoo.com>
> To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net> 
> Sent: Monday, April 16, 2012 12:16 PM
> Subject: P3 Frequency 
>   
> 
> Just completed my P3 and hooked it up the K3. everything works fine except that is does not display the center frequency and the qsy function for MKR and B does not work. 
> Any direction would be appreciated.
> Thanks
> Bill - W0BBI
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>