[Elecraft] Troubel TX on K3

Thu Apr 12 10:15:12 EDT 2012

Hello

the  problem  is  solved  - the problem has been raised not due to any
configsetting and macros - it was my cat, which was walking behind the
radio.  And over her "cable-walk"  she has removed parts of the cables
between the different units.
So  after  I  replaced  and  secured  all  cable again - everything is
working well again.

So finally I put up a "Cat-Stop-note" at the shack-table, hihi

Thanks everybody for their hints...

73

Karl
DL2FAG

am Mittwoch, 11. April 2012 um 21:49 schrieben Sie:

> Hi Carl:

> I assume everything was fine before you made any macro/menu setting changes.
> Did you save a K3 configuration file before you made those changes? If so,
> try to restore to that configuration using the K3 Utility.  I don't beliove
> reloading the firmware will do anything as the K3 will remember its settings
> independently of the firmware version.

> GL
> Elliott

> ----- Original Message ----- 
> From: "Karl-Heinz - DL2FAG" <dl2fag at arcor.de>
> To: <Elecraft at mailman.qth.net>
> Sent: Wednesday, April 11, 2012 12:24 PM
> Subject: Re: [Elecraft] Troubel TX on K3

> Hi Elliott

> Even  with VOX or PTT the same result - no power output in SSB and CW.
> In Data Mode - if I push the microphone PTT - a diddle is produced and
> I have a power output.

> Karl

> am Mittwoch, 11. April 2012 um 21:17 schrieben Sie:

>> Did you turn on the VOX??

>> ----- Original Message ----- 
>> From: "Karl-Heinz - DL2FAG" <dl2fag at arcor.de>
>> To: <Elecraft at mailman.qth.net>
>> Sent: Wednesday, April 11, 2012 11:51 AM
>> Subject: Re: [Elecraft] Troubel TX on K3

>> Hello,

>> the TX isn't blinking. Have done further test and recognized, that if I
>> chooes the FM-Mode - the Power Output was ok. Seems be the K3 does not 
>> work
>> in CW and SSB so far.

>> As well the TUNE-button is working as well.

>> Karl

>> =============================

>> am Mittwoch, 11. April 2012 um 19:58 schrieben Sie:

>> Lieber Karl-Heinz,

>> First thing to check: Make sure "TX" on right side of display isn't
>> blinking. If it is, press and hold TEST.

>> 73,

>> Hank, W6SX

>> On Wed, Apr 11, 2012 at 10:53 AM, Karl-Heinz - DL2FAG <dl2fag at arcor.de>
>> wrote:
>> Hello,

>> I   am   running   into some trouble with the K3 after playing around
>> with the unit (macro, settigs etc.)
>> After  a while I recognized, that the K3 does not transmit - no output in 
>> CW
>> nor
>> in SSB - even PTT does work.
>> Tuning  with  the  "TUNE-Button"  works  and  give the adjusted output
>> power.

>> Seems  that  maybe I have misconfigured a parameter - but doesn't find
>> it.

>> Any  idea  from  the  readers of the refelctors - where I have to look
>> for?

>> Thanks

>> --
>> 73 de
>> Karl-Heinz - DL2FAG
>> mailto:dl2fag at arcor.de

>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net

>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html

>> -- 
>> Mit freundlichen Grüßen
>> Karl-Heinz - DL2FAG
>> mailto:dl2fag at arcor.de

>> ===8<============== Ende des Original Nachrichtentextes =============

-- 
Mit freundlichen Grüßen
Karl-Heinz - DL2FAG
mailto:dl2fag at arcor.de