[Elecraft] K3: PTT IN problem - cont'd...

[Don Wilhelm]

John,

Due to your time differences, I would suggest emailing support at elecraft.com.

73,
Don W3FPR


On 4/11/2012 8:07 PM, VK7JB wrote:
> Hello Again,
>
> Well,  the PTT IN problem persists.
>
> I can confirm that the K3 is not in TEST mode and that the VOX/PTT parameter
> is definitely set to PTT.
>
> I've taken the top of the rig and checked that all the rear panel hardware
> is still connected and in place.
>
> PTT on the front panel mic connector and the XMIT front panel button work
> normally.  It's still only the rear panel PTT IN that's the problem.
>
> Anywhere else I should look before I call support @ Elecraft?
>
> Thanks to all who replied via pm with helpful suggestions,
>
>