[Elecraft] Troubel TX on K3

[Bill Conkling]

I have followed this thread today, and I haven't seen anyone ask, "Did you
check the POWER setting".  I turned the power down, forgot and had no RF
out.  The ATU worked, and the digital mode, FSK D, tapping the key will
produce 'didles' but no RF power.

Perhaps you did some config or cal functions, turned down the power and
forgot to turn it up again.

Just a thought....

...bill  nr4c

-----Original Message-----
From: Karl-Heinz - DL2FAG [mailto:dl2fag at arcor.de] 
Sent: Wednesday, April 11, 2012 1:53 PM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] Troubel TX on K3

Hello,

I   am   running   into some trouble with the K3 after playing around
with the unit (macro, settigs etc.)
After  a while I recognized, that the K3 does not transmit - no output in CW
nor
in SSB - even PTT does work.
Tuning  with  the  "TUNE-Button"  works  and  give the adjusted output
power.

Seems  that  maybe I have misconfigured a parameter - but doesn't find
it.

Any  idea  from  the  readers of the refelctors - where I have to look
for?

Thanks


-- 
73 de
Karl-Heinz - DL2FAG
mailto:dl2fag at arcor.de

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html