[Elecraft] Troubel TX on K3

[Karl-Heinz - DL2FAG]

Hi Elliott

Even  with VOX or PTT the same result - no power output in SSB and CW.
In Data Mode - if I push the microphone PTT - a diddle is produced and
I have a power output.

Karl

am Mittwoch, 11. April 2012 um 21:17 schrieben Sie:

> Did you turn on the VOX??

> ----- Original Message ----- 
> From: "Karl-Heinz - DL2FAG" <dl2fag at arcor.de>
> To: <Elecraft at mailman.qth.net>
> Sent: Wednesday, April 11, 2012 11:51 AM
> Subject: Re: [Elecraft] Troubel TX on K3


> Hello,

> the TX isn't blinking. Have done further test and recognized, that if I
> chooes the FM-Mode - the Power Output was ok. Seems be the K3 does not work
> in CW and SSB so far.

> As well the TUNE-button is working as well.

> Karl

> =============================

> am Mittwoch, 11. April 2012 um 19:58 schrieben Sie:

> Lieber Karl-Heinz,

> First thing to check: Make sure "TX" on right side of display isn't 
> blinking. If it is, press and hold TEST.

> 73,

> Hank, W6SX



> On Wed, Apr 11, 2012 at 10:53 AM, Karl-Heinz - DL2FAG <dl2fag at arcor.de>
> wrote:
> Hello,

> I   am   running   into some trouble with the K3 after playing around
> with the unit (macro, settigs etc.)
> After  a while I recognized, that the K3 does not transmit - no output in CW
> nor
> in SSB - even PTT does work.
> Tuning  with  the  "TUNE-Button"  works  and  give the adjusted output
> power.

> Seems  that  maybe I have misconfigured a parameter - but doesn't find
> it.

> Any  idea  from  the  readers of the refelctors - where I have to look
> for?

> Thanks


> --
> 73 de
> Karl-Heinz - DL2FAG
> mailto:dl2fag at arcor.de

> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net

> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html





> -- 
> Mit freundlichen Grüßen
> Karl-Heinz - DL2FAG
> mailto:dl2fag at arcor.de

> ===8<============== Ende des Original Nachrichtentextes =============






-- 
Mit freundlichen Grüßen
Karl-Heinz - DL2FAG
mailto:dl2fag at arcor.de