[Elecraft] Troubel TX on K3

[Bob Wolbert]

Karl,

In the CONFIG menu, are FLTX SB and FLTX CW set to a 2.8 (or 2.7) kHz BW 
filter?


73 de Bob, K6XX

On 4/11/2012 11:51 AM, Karl-Heinz - DL2FAG wrote:
> Hello,
>
> the TX isn't blinking. Have done further test and recognized, that if I chooes the FM-Mode - the Power Output was ok. Seems be the K3 does not work in CW and SSB so far.
>
> As well the TUNE-button is working as well.
>
> Karl
>
> =============================
>
> am Mittwoch, 11. April 2012 um 19:58 schrieben Sie:
>
> Lieber Karl-Heinz,
>
> First thing to check: Make sure "TX" on right side of display isn't blinking. If it is, press and hold TEST.
>
> 73,
>
> Hank, W6SX
>
>
>
> On Wed, Apr 11, 2012 at 10:53 AM, Karl-Heinz - DL2FAG<dl2fag at arcor.de>  wrote:
> Hello,
>
> I   am   running   into some trouble with the K3 after playing around
> with the unit (macro, settigs etc.)
> After  a while I recognized, that the K3 does not transmit - no output in CW nor
> in SSB - even PTT does work.
> Tuning  with  the  "TUNE-Button"  works  and  give the adjusted output
> power.
>
> Seems  that  maybe I have misconfigured a parameter - but doesn't find
> it.
>
> Any  idea  from  the  readers of the refelctors - where I have to look
> for?
>
> Thanks
>
>
> --
> 73 de
> Karl-Heinz - DL2FAG
> mailto:dl2fag at arcor.de
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html