[Elecraft] BNC jumpers? (Thanks)

[Bob Nielsen]

RG142 has a copperweld center conductor which isn't very flexible  RG400 is similar but has a stranded center conductor and is more flexible (but also expensive).

73, Bob N7XY

On Apr 8, 2012, at 11:24 AM, David Cutter wrote:

> I think RG142 is closer.  Specifying that doubles the price, depending on 
> length.  Worth it if you need the power handling and flexibility.
> 
> David
> G3UNA
> 
> 
> ----- Original Message ----- 
> From: "Chuck Shefflette" <aa3cs at me.com>
> To: "Joe Subich, W4TV" <lists at subich.com>
> Cc: <elecraft at mailman.qth.net>
> Sent: Sunday, April 08, 2012 3:57 PM
> Subject: Re: [Elecraft] BNC jumpers? (Thanks)
> 
> 
>> The question is, can you get RG-316? Same size as 174 but higher power 
>> handling capacity and tougher jacket.
>> 
>> Chuck - AA3CS
>> 
>> Sent from my iPhone
>> 
>> On Apr 8, 2012, at 10:55, "Joe Subich, W4TV" <lists at subich.com> wrote:
>> 
>>> 
>>> The winner seems to be Cables on Demand www.cablesondemand.com with
>>> L-Com http://www.l-com.com/productcenter.aspx?ID=8 a strong second.
>>> 
>>> Both have RG-58 or RG-174 cables at reasonable prices.  L-Com offers
>>> cables at any length - in 6" increments to 3 feet and one foot steps
>>> beyond that - while Cables on Demand does not have quite the choice
>>> of lengths but are slightly (5 to 7%) less expensive.
>>> 
>>> Right angle BNC connectors are also available from either vendor for
>>> either RG-174 or RG-58.
>>> 
>>> 73,
>>> 
>>>   ... Joe, W4TV
>>> 
>>> 
>>> On 4/6/2012 2:32 PM, Joe Subich, W4TV wrote:
>>>> 
>>>> Anyone have a source for quality *50 Ohm* BNC jumpers - like that
>>>> supplied with the P3 - at a reasonable price?  I can't find them
>>>> locally and the ones at places like All Electronics are of poor
>>>> quality/intermittent, etc.
>>>> 
>>>> 73,
>>>> 
>>>>    ... Joe, W4TV
>>>> 
>>>> 
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

_____
N7XY DX Cluster Node - telnet to n7xy.net, port 7300