[Elecraft] BNC jumpers? (Thanks)

[Joe Subich, W4TV]

 > I generally would want UHF connectors, but some BNC.

Neither of the two houses I mentioned show UHF connectors at all.
They're generally targeting the commercial world and seem to be at
home with BNC, TNC, N, SMA and some of the specialty "Motorola"
connectors.

On the other hand, there are some places that specialize in the
amateur world - Cable Experts (www.cablexperts.com), ABR Industries
(www.abrind.com) - who don't seem to have BNC to BNC but look to be
heavily into UHF and N cables in .240 inch (RG8X size), .405 inch
(RG-213, LMR-400 size), and .60 inch (LMR-600) cables.   The LMR/CNT
cables are double shielded (braid over foil) where the RG8X and
RG-213 cables are single (95%) shield.

Cable Experts also shows RG-142U (Teflon, .195 inch) cables ...


73,

    ... Joe, W4TV


On 4/8/2012 1:53 PM, Dick Dievendorff wrote:
> What is the double-shielded thin flexible stuff, thinner than RG-58?  My LMR
> 240 jumpers are a good small diameter but too stiff for my liking.  I
> generally would want UHF connectors, but some BNC. I think I want double
> shielding because it's in a station with multiple transmitters and I want to
> limit leakage.
>
> Dick, K6KR
>
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of David Cutter
> Sent: Sunday, April 08, 2012 8:24 AM
> To: Chuck Shefflette; Joe Subich, W4TV
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] BNC jumpers? (Thanks)
>
> I think RG142 is closer.  Specifying that doubles the price, depending on
> length.  Worth it if you need the power handling and flexibility.
>
> David
> G3UNA
>
>
> ----- Original Message -----
> From: "Chuck Shefflette"<aa3cs at me.com>
> To: "Joe Subich, W4TV"<lists at subich.com>
> Cc:<elecraft at mailman.qth.net>
> Sent: Sunday, April 08, 2012 3:57 PM
> Subject: Re: [Elecraft] BNC jumpers? (Thanks)
>
>
>> The question is, can you get RG-316? Same size as 174 but higher power
>> handling capacity and tougher jacket.
>>
>> Chuck - AA3CS
>>
>> Sent from my iPhone
>>
>> On Apr 8, 2012, at 10:55, "Joe Subich, W4TV"<lists at subich.com>  wrote:
>>
>>>
>>> The winner seems to be Cables on Demand www.cablesondemand.com with
>>> L-Com http://www.l-com.com/productcenter.aspx?ID=8 a strong second.
>>>
>>> Both have RG-58 or RG-174 cables at reasonable prices.  L-Com offers
>>> cables at any length - in 6" increments to 3 feet and one foot steps
>>> beyond that - while Cables on Demand does not have quite the choice
>>> of lengths but are slightly (5 to 7%) less expensive.
>>>
>>> Right angle BNC connectors are also available from either vendor for
>>> either RG-174 or RG-58.
>>>
>>> 73,
>>>
>>>     ... Joe, W4TV
>>>
>>>
>>> On 4/6/2012 2:32 PM, Joe Subich, W4TV wrote:
>>>>
>>>> Anyone have a source for quality *50 Ohm* BNC jumpers - like that
>>>> supplied with the P3 - at a reasonable price?  I can't find them
>>>> locally and the ones at places like All Electronics are of poor
>>>> quality/intermittent, etc.
>>>>
>>>> 73,
>>>>
>>>>      ... Joe, W4TV
>>>>
>>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>