[Elecraft] CW mode question

[Arie Kleingeld PA3A]

Maybe the cause is the following:

listening on 14050 to a cw signal with pitch 1kHz in USB, then the 
cw-signal is on 14051.

Switching the K3 to CW with untouched dial, then you listen on 14050.

Is that the reason?

Arie PA3A

Op 6-4-2012 17:25, Bill Miller schreef:
> I just acquired a K-3 and have spent an hour  getting somewhat familiar. I tuned 20 M and heard a nice DX station at about S-6 using the USB filter setting. I realized I can only transmit CW with the mode set to CW. When I made the change however, I could not hear either the DX guy (gal?) nor the other in the QSO - I heard both with the SSB setting.
>   
> Gotta be a way to bypass what seemed like attenuation, right?
>   
> Bill K9HXO
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>