[Elecraft] S-meter Lite with LP-Bridge or VSPE

[Gregg W6IZT]

It is difficult at best to get multiple applications to share a serial port.
In your case it is likely that both apps are sending queries to the radio
causing collisions to occur. This can result in the apps locking up or in
some cases the serial port on the K3 locking up.

I use DXLab for logging and SpectraVue with an SDR-IQ for a panadapter. They
share the same serial port and play well together because I can configure
DXLabs to not send queries to the radio. DXlabs will read the data returned
from the radio from the SpectraVue queries.

Gregg
W6IZT

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of NZ0T
Sent: Tuesday, September 27, 2011 6:42 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] S-meter Lite with LP-Bridge or VSPE

Has anyone had any luck getting S-Meter Lite to work with LP-Bridge 0r VSPE?

I like to keep my logging program active and would love to run S-Meter Lite
at the same time.

73 Bill NZ0T

--
View this message in context:
http://elecraft.365791.n2.nabble.com/S-meter-Lite-with-LP-Bridge-or-VSPE-tp6
838124p6838124.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html