[Elecraft] One minor issue with the KPA500

[Jack Brindle]

This _was_ fixed in the V1.11 firmware. I will be contacting you off-list to get more details to determine why it may not be working in your setup.

Jack Brindle, W6FB
Elecraft Engineering

On Sep 25, 2011, at 11:01 AM, Richard Squire - HB9ANM wrote:

> On July 1, I wrote:
> "When BAND CHG is set to STBY (which I prefer in order to avoid tuning my
> dipole on the new band with 400 W instead of 20 W by mistake!), the KPA500
> does go into STBY when changing bands but the K3 keeps the lower power
> setting and does not return to 100 W. This does not happen if BAND CHG is
> set to NOR." 
> 
> This was supposed to be a timing problem to be resolved with the next FW
> release but FW 1.11 didn't solve it. Any one else noticed this?
> Not a big issue but I'd like to go for BAND CHG = STBY...
> Anyway, the KPA500 is joy to use.
> 
> 73
> 
> -----
> Richard - HB9ANM
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/One-minor-issue-with-the-KPA500-tp6538841p6829648.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html