[Elecraft] change DATA mode alone

[Jorge Diez - CX6VM]

Hi Don,

 

that´s right.

 

I received an answer from John K3CT that was working with K3 and N1MM

 

Jorge,

See section 3 of the manual:

http://n1mm.hamdocs.com/tiki-index.php?page=Supported+Radios&structure=N1MM+
Logger+Documentation

 

The RTTY selection is mapped to the K3 radio mode of FSK D.

 

Just if it´s of help for someone else

 

73,

Jorge

CX6VM

 

-----Mensaje original-----
De: Don Wilhelm [mailto:w3fpr at embarqmail.com] 
Enviado el: Domingo, 25 de Septiembre de 2011 11:02 a.m.
Para: Jorge Diez - CX6VM
CC: elecraft at mailman.qth.net
Asunto: Re: [Elecraft] change DATA mode alone

 

Jorge,

 

That does sound like N1MM is changing the data submode for you.

>From the K3 Programmer's Reference, the DT command will set the DATA 

sub-mode (if the K3 is already in DATA mode).

The MD command will set the K3 mode.  MD6; would set DATA mode, and then 

DT2; would set FSK D.

 

There may be menu settings in N1MM to control the behavior, so asking on 

the N1MM list is a prudent thing to do.

 

73,

Don W3FPR

 

 

On 9/25/2011 9:28 AM, Jorge Diez - CX6VM wrote:

> Hi Don,

> 

> playing a Little more, I noticed that when I click in a callsign in the
N1MM

> bandmap, the K3 change to FSK D

> 

> Will ask in N1MM list

> 

>