[Elecraft] K1: No output on 18MHz

[Stephen Prior]

All sorted, although I'm not 100% sure whether the problem was a mixer
oscillator not oscillating of a bad connection somewhere.  A few taps with
a screwdriver on the can of the crystal and re-assembly (for about the
fifth time!) brought 18MHz back to life.  Thanks to Dave, AB9CA/4 for the
pointer.

73 Stephen G4SJP 

On 24/09/2011 17:20, "Stephen  Prior" <sjp at sjprior.fsnet.co.uk> wrote:

>
>I get full power output with the four band board on 40/30/20, but not a
>thing on 17m.  The receiver is also dead on 17m.  I have pulled out the
>KAT1
>and the four band board beneath and checked visually - all looks neat.
>Plugged the boards back in, still the same.
>
>I have only had the radio a few days and haven't had much time to check it
>out so I cannot remember whether it was like it when I received it.
>Unfortunately I didn't build it, so diving into the manual 2/3 of the way
>in
>is tricky, but I have read the appropriate bits and I am no further
>forward.
>
>I'd be very grateful for any advice please,
>
>73, Stephen G4SJP
>
> 
>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>