[Elecraft] K3 read out for a macro

[Peter]

Perhaps is Erwin a contester in a M/M group
It will be nice to make all the prived bring in K3 to be configured in 
the same way to make them equal

This isn''t possible because a copy is bound to the serial of the K3

Peter
PC2A
Don Wilhelm schreef:
> Erwin,
>
> K3Utility has provisions for saving the K3 configuration to a file on 
> your computer, and then re-loading that configuration.  It is not a 
> macro, the file is unique to K3 Utility.
>
> I do not understand why a macro is wanted/needed, but you may have 
> something specific in mind.
> If that is the case, refer to the K3 Programmer's Reference.  Virtually 
> everything in the K3 can be accessed by software, and if you write the 
> software to create a macro and send it back to the K3, yes it could be 
> done, but I don't think that is done with any current software package.
>
> 73,
> Don W3FPR
>
> On 9/21/2011 2:11 PM, DK5EW wrote:
>   
>> Hi all,
>> is the a possibility to read out the K3 settings and save it as a macro ?
>> best regards Erwin/DK5EW
>>
>>     
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>