[Elecraft] K1HTV Re: K3 DVR anomaly

[Rich - K1HTV]

No Rick. All messages that I record in the K3 DVR memories have zero delay time
at the end of the recordings, when played back alone. If a second DVR message is
started while the first one is being played, there is a delay of silence equal
to the length of the message in the memory for the second button pressed. 

Try it and let me know if you also experience what I have observed.

73,
Rich - K1HTV

= = =

-----Original Message-----
From: Rick Prather [mailto:k6limaecho at gmail.com] 
Sent: Monday, September 19, 2011 21:52 PM
To: Rich - K1HTV
Cc: Elecraft List
Subject: Re: [Elecraft] K1HTV Re: K3 DVR anomaly

Rich,

If you have a delay at the end of the message then you recorded it that way.

I had to go back and record my DVR messages several times before I was able to
hit the "rec" button immediately after I was done.   Now if I give my call for
instance the TX drops as soon as I finish with the call.

Rick
K6LE

On 9/19/2011, at 6:46 , Rich - K1HTV wrote:

> Thanks Gary. It's a real pain when I'm in a pileup calling a DX 
> station on SSB and accidently hit the same or another memory button 
> before the message playing back has ended. When this happens, my 
> transmission stops but the K3 stays in the TX node during that time . 
> If the DX stations quickly replies during after the message ends I can 
> not here him because the K3 hasn't yet switched back to receive. Not good :-(
.
> 
> Hope that this can be corrected in the near future rather than later 
> distant future. Thanks
> 
> 73,
> Rich - K1HTV
> 
>