[Elecraft] K3 and Utility question

[Dick Dievendorff]

I'm going to guess that you have config PTT-KEY set to something other than OFF-OFF and your device driver for the USB to serial adapter or RS232 port wiggles the RTS or DTR pins during initialization

73 de Dick, K6KR


On Sep 16, 2011, at 7:28, John Watkins <n0evh at sbcglobal.net> wrote:

> When I have the K3 turned on when I start up my laptop and it happens to be in SSB mode the com port I use for the utility apparently causes the PTT to send about 5 longs T's over the air.  If I am in CW no problem because I have told the rig to come up with VOX off.
> 
> Is there a setting that will prevent this unattended transmission while in SSB mode?
> 
> Thanks, John N0EVH
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html