[Elecraft] K3 - dual mikes at same time - biased and un-biased?

[Dave New, N8SBE]

I have the hand mic on the front, and the Heil HC-4 set on the back, so
one takes bias, and the other doesn't.  Also, one takes hi gain, the
other doesn't.

I find that when I switch from front to rear and back, my K3 remembers
the gain, but not the bias.  I have to remember to change the bias,
also.

Is there a way to tell the K3 via some config menu to remember the bias
setting, also, so when I switch from front to rear and back, the bias
AND the gain switch also?

73,

-- Dave, N8SBE

> -------- Original Message --------
> Subject: Re: [Elecraft] K3 - dual mikes at same time - biased and
> un-biased?
> From: Bob - W6OPO <bob.w6opo at gmail.com>
> Date: Tue, August 16, 2011 6:15 pm
> To: elecraft at mailman.qth.net
>
>
> I programed a soft key (XIT) to bring up the mic selection.  So I hold XIT
> then tap #1 and/or #2 = Done.
>
> The #1 switches between front and rear jacks and #2 turns bias on/off.  I
> consider that fast - for me.
>
> 73,
>
> Bob - W6OPO
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-dual-mikes-at-same-time-biased-and-un-biased-tp6687183p6693197.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html