[Elecraft] Yamaha CM500 and DXDoubler

[k6rb at baymoon.com]

Jorge,

If it works with the TS850, then the CM500 and bias adaptor are okay. With
the DX Doubler, your mic input (on the front) is simply relay switched to
the mic output (on the back) then carried to the K3 rear mic connector via
the DX Doubler interface cable. Make sure you've got connectivity from the
end to end for both the mic line and the gnd line. If that's okay, then it
has to be something with the K3 set up.

Rob K6RB

> Hello,
>
>
>
> I used with no problema my CM500 with the K3.
>
>
>
> Now I want to try the DXDoubler, and seems the CM500 don´t work with
> DXDoubler, could be possible?
>
>
>
> I connected my old Heil ProSet and now I can transmit in the second radio
> (TS850) but still not in the K3.
>
>
>
> Any help about menu, config for use Heil ProSet connected to a DXDoulber
> and
> to K3
>
>
>
> thanks!
>
> Jorge
>
> CX6VM
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>