[Elecraft] Yamaha CM500 and DXDoubler

[Jorge Diez - CX6VM]

thanks Rob,

I put the two AAA batteries and is working in the radio2 8TS850) but not TX
in radio1 = K3

I have MIC SEL = rP.L and not transmitting.

Any idea?

thanks,
Jorge
CX6VM

-----Mensaje original-----
De: k6rb at baymoon.com [mailto:k6rb at baymoon.com] 
Enviado el: Viernes, 28 de Octubre de 2011 04:56 p.m.
Para: Jorge Diez - CX6VM
CC: 'Elecraft Reflector'; n1mmlogger at yahoogroups.com
Asunto: Re: [Elecraft] Yamaha CM500 and DXDoubler

When you use the CM500 with DX Doubler, you need to use the little battery
bias unit that came with CM500 because the DX Doubler will NOT carry back
the bias from the K3 to the headset. It uses a mono plug for the
microphone, not the stereo plug. Also, don't forget to turn off "bias" on
the K3 when you use CM500/bias adaptor with DX Doubler.

Rob K6RB

> Hello,
>
>
>
> I used with no problema my CM500 with the K3.
>
>
>
> Now I want to try the DXDoubler, and seems the CM500 don´t work with
> DXDoubler, could be possible?
>
>
>
> I connected my old Heil ProSet and now I can transmit in the second radio
> (TS850) but still not in the K3.
>
>
>
> Any help about menu, config for use Heil ProSet connected to a DXDoulber
> and
> to K3
>
>
>
> thanks!
>
> Jorge
>
> CX6VM
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>