[Elecraft] P3: Can the Panadapter be used with a Ten Tec Orion 1?

[nr4c]

Pardon me, but I have read a lot of the traffic on this topic, and some 
very good ideas have been considered.  Recorded audio into the mic jack 
or a sound source as in a 'pink' noise, or ''white' noise allows the 
radio to be adjusted.  I have a K3, so I can use it with the P3 to 
analyze the audio of my other radio(s) while transmitting into a 'dummy' 
load.

But, none of these account for the difference in mics.  A station with 
a dozen radios and a dozen mic is still going to show differences in 
transmitted audio due to different mics and mic usage/voices.

I'm glad I don't have to do this!

...bill   nr4c



On Tue, 25 Oct 2011 13:09:47 +0000, Dave Johnson wrote:
> Lu, if you have access to an SDR receiver that can record it's output
> on a PC, it might be easier that using a noise source.
>
> When comparing several microphones and headsets on my K3, I used a
> Perseus SDR to play back the results for A/B/C/D comparison in order
> to pick the best equaliser/mic combination. The saved files from the
> Perseus were labelled to match the microphone and can be played back
> very easily, in addition, recording a wide chunk of frequency means
> the bandwidth can easily be checked if that might be an issue.
>
> 73 Dave
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html