[Elecraft] K3 split on FM

[Rob May]

Are both VFO's in FM mode?
Rob
NV5E


----------------------------------------
> From: crcook at pacbell.net
> Date: Sat, 15 Oct 2011 17:24:32 -0700
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3 split on FM
>
> This afternoon, I saw T32C on 10M FM, 29.580.. They were running split (actually several split frequencies over the time I was listening). The signal was a solid 59 for a while in Northern California. I tried to set to Split mode with the transmit frequency high, and got a "Split N/A" message. Checked through the K3 manual about FM and Split and saw nothing that would help. Split works fine in USB on all bands. I have not run FM before on the rig, so there may be something obvious that I overlooked. Yes, I do have the FM filter installed.
>
> Any help appreciated.
>
> 73s
>
> Randy K6CRC
> K3#2051
> k6crc at arrl.net
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html