[Elecraft] Breakthrough from 28MHz to 144Mhz

[John Ragle]

Roger, et al. ...

     I have to confirm observing this on my set-up...there have been 
strong CW signals on 10 meters, and they appear through both my 
XV144*/and/* my XV432. I first noticed this on my XV432, and it gave me 
quite a start to hear European CW signals "on" 432 MHz (don't I wish!!). 
Both xvtrs are connected to my K3/P3 combination. This is one of the 
downsides of too many spots on the solar disk, I guess............

     One (im)pertinent observation: When I noticed this, I switched my 
XV432 antenna input over to a UHF dummy load, connected through good 
coax and only about 2 feet away. The signals did not diminish in 
strength, so they were not coming in through the XV432 antenna input.

John Ragle -- W1ZI

=====

On 10/15/2011 8:18 AM, Roger Banks wrote:
> Hi All
> I was monitoring 144.370 today on the K3 with K144XV module installed when I
> heard a SSB sideband signal at about S2. Also connected to the rig was a
> Butternut HF6V for HF.
> The signal turned out to be a strong station on 28.370 - the IF frequency.
> Anyone else noticed breakthrough to 144 from the 28 IF ??
> Roger - GW4WND
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/Breakthrough-from-28MHz-to-144Mhz-tp6895441p6895441.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>

-- 
Sent from my lovely old Dell XPS 420