[Elecraft] K3: Some advice on mods

[W0MU Mike Fatchett]

I think I would do them all at once, opposed to doing one, rebuilding 
the radio, tearing it apart etc.

Mike W0MU

J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster w0mu.net


On 10/14/2011 5:59 PM, Phil Westover wrote:
> I just received the following mod kits from Elecraft:
>
> KPA3 12 v Sense Modification (1N4148)
> K3 Hardware AGC Threshold Mod Kit
> K3 Audio Line Out Mod Kit
> K3 DSP Upgrade Swap
> K3 I/O Buffer Mod Kit
> K3 VFO Tuning Noise Filter Kit
> K3 Remote I/O Board Upgrade
> K3 Synth Stiffener
>
> Question:  Even though all of these are relatively simple (I've got lots of
> successful experience with PCB work/rework), do any of you have a
> recommended strategy for performing these mods?  (i.e., just jump in and do
> them all at once?  do them one at a time, checking radio function each time?
> doing certain ones together, then checking operation before doing others?
> etc.)
>
> 73,
> Phil, WA7URV  K3 #1206
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-Some-advice-on-mods-tp6894406p6894406.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html