[Elecraft] Hooking up k3,p3 and kpa500?

[Don Wilhelm]

Tom,

You will need 2 serial ports if all are to be connected at the same 
time.  The K3 and the P3 setup is integrated, connect the P3 to the K3 
with a serial cable and connect the PC to the P3.

The KPA500 needs a separate serial port (or the same serial port used 
for the K3/P3 when it is not in use).
The KPA500 serial connection is only used for firmware downloads and 
setup, so it does not need to be connected all the time.

73,
Don W3FPR

On 10/9/2011 11:02 PM, tomb18 wrote:
> I have looked through the manuals and have not seen how one hooks up all
> three together using the serial ports.  How is this done?
> Thanks, Tom
> VA2FSQ
>