[Elecraft] Using Micro Band Decoder and computer logging at same time w/K3

[Joe Subich, W4TV]

 > I have my Micro Band Decoder attached the RS-232 port of the K3 to
 > auto change antennas.Now I would like to hook the K3 to my computer
 > for logging. I don’t think they will share a port as both would be
 > using the same com port if a Y was used.

The (discontinued) microHAM Band Decoder was designed to be used
"in-line" between a computer and transceiver.  Connect the computer
logging program to the "PC" connection on Band Decoder and leave
the RS-232 jack connected to the K3.  The Band Decoder will pass
the necessary CAT data between the transceiver and logging program.

73,

    ... Joe, W4TV

On 10/7/2011 2:20 PM, george wrote:
> I have my Micro Band Decoder attached the RS-232 port of the K3 to
> auto change antennas.Now I would like to hook the K3 to my computer
> for logging. I don’t think they will share a port as both would be
> using the same com port if a Y was used. Any suggestions that would be
> simple to implement or should I just forget about both at same time.
>
> Thanks
>
> George wb5xx
> ______________________________________________________________
> Elecraft mailing list Home:
> http://mailman.qth.net/mailman/listinfo/elecraft Help:
> http://mailman.qth.net/mmfaq.htm Post:
> mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this
> email list: http://www.qsl.net/donate.html