[Elecraft] pactor on k3
ussv dharma
ussvdharma at yahoo.com
Sun Oct 2 18:25:29 EDT 2011
Stupid me....operator head space...one of the cables from the pactor modem not connected.....thank you peoples...you got me on the right track..pactor now working.
If you don't change direction you WILL arrive exactly where you're headed!!
Susan Meckley, Skipper W7KFI-mm AFA9SM
USSV DHARMA
________________________________
From: Dr. Werner Furlan <furlan at gmx.net>
To: ussv dharma <ussvdharma at yahoo.com>
Cc: elecraft at mailman.qth.net
Sent: Sunday, October 2, 2011 7:31 AM
Subject: Re: [Elecraft] pactor on k3
hi Susan,
PTT to PTT in RCA connector
RX Audio - Line out RCA (stereo)
TX Audio - Line in RCA (mono)
Transceiver Control Connector
TxD-V24 (pin 13) -> RS232 pin 2
RxD-V24 (pin 17) -> RS232 pin 3
TGND - (pin 18) -> RS232 pin 5
When you have your cables right and get no mod out you have to check the microphone and
Line settings in your K3.
Mode is DATA A, USB
Menu Function Sync DT -S on
Menu Mic Sel Line in
I suspect you have the mic selector wrong or Line gain turned low.
When you adjust Mic Gain, "Line" should appear in the K3 display.
73!
Werner oe9fwv
ussv dharma schrieb am 2 Oct 2011 um 1:21:
> Aloha:
> Prior to sending k3 to elecraft for updating I worked Pactor with no problems.
>
> Multi connector of Pactor Modem .....to "RS232" on back of k3
> RCA Ptt of Modem..............................to PTT IN on back of k3
> Audio of Pactor Modem.......................to line in (stereo) on back of K3
>
> Now however, I can still do psk31 with no problem, but can not get any output when trying to use pactor. I hear everything swithcing, but no power out
>
>
> COMMENTS>>.....HELP
>
>
>
> If you don't change direction you WILL arrive exactly where you're headed!!
>
> Susan Meckley, Skipper W7KFI-mm AFA9SM
> USSV DHARMA
>
--
The problem with being in the middle of the road is that you tend to get run over.
Email powered by Pegasus Mail free at < http://www.pmail.com >
Homepage: http://www.qsl.net/oe9fwv/
Fone +43 5522 75013
Mobile +43 664 6340014
Fax: +43 5522 22505
More information about the Elecraft
mailing list