[Elecraft] 99.9 to 1

[Ron D'Eau Claire]

In addition to the other comments, there's a PA Jumper block that must be in
place on the RF board near the large opening in the back panel (see Fig 11
in most versions of the Assembly Manual). That jumper completes the RF path
for K3's that do not have the KPA100 amplifier option installed. 

Ron AC7AC


On Sun, Oct 2, 2011 at 11:02 AM,  <DBellW6AQ at aol.com> wrote:
> Getting around to calibrating my power on my K3-10 and no matter what the
> load, dummy or antenna, the reflected power is 99.9 to 1.  Tuner is set to
> Bypass.  What did I do wrong?
>
> Thanks in advance, Dave