[Elecraft] pactor on k3

[ussv dharma]

My mistake in typing....it is in the "out" jack of the k3....sorry.

 
If you don't change direction you WILL arrive exactly where you're headed!!
 
Susan Meckley, Skipper W7KFI-mm  AFA9SM
                         USSV DHARMA
 


________________________________
From: Jeff Cochrane - VK4BOF <vk4bof.elecraft at gmail.com>
To: ussv dharma <ussvdharma at yahoo.com>; elecraft at mailman.qth.net
Sent: Saturday, October 1, 2011 10:50 PM
Subject: Re: [Elecraft] pactor on k3

Change the audio lead to Line Out on the K3.
That *should* fix the issue.


73 de
Jeff Cochrane - VK4BOF
East Innisfail
QLD, Australia
K3 #4257, KPA500 #161, P3 #1216

----- Original Message ----- From: "ussv dharma" <ussvdharma at yahoo.com>
To: <elecraft at mailman.qth.net>
Sent: Sunday, October 02, 2011 6:21 PM
Subject: [Elecraft] pactor on k3


Aloha:
Prior to sending k3 to elecraft for updating I worked Pactor with no problems.

Multi connector of Pactor Modem .....to "RS232" on back of k3
RCA Ptt of Modem..............................to PTT IN on back of k3
Audio of Pactor Modem.......................to line in (stereo) on back of K3

Now however, I can still do psk31 with no problem, but can not get any output when trying to use pactor. I hear everything swithcing, but no power out


COMMENTS>>.....HELP



If you don't change direction you WILL arrive exactly where you're headed!!

Susan Meckley, Skipper W7KFI-mm AFA9SM
USSV DHARMA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html