[Elecraft] K3 suggestion

[Gary VK4FD]

Don,

Many requests for enhancements to the K3 are indeed already there and it behoves us, the operators, to exercise our knowledge of the equipment rather than expect the manufacturer to do all the work for us.....:-)

Having said that I seem to 'discover' a feature long forgotten about when I have not used it for some time....aaaah, the brain plays tricks on us old dinosaurs eh?

Grin

Gary


VK4FD - Motorhome Mobile
Elecraft Equipment
K3 #679, KPA-500 #018
Living the dream!!!

  ----- Original Message ----- 
  From: Don Wilhelm 
  To: elecraft at mailman.qth.net 
  Sent: Wednesday, November 30, 2011 12:35 PM
  Subject: Re: [Elecraft] K3 suggestion


  Tony,

  The power level is displayed if you change the Power knob even a small 
  amount - just rotate he knob a little to see the current power.

  The bandwidth graphic already shows the bandwidth in use.  While it has 
  some granularity, it is still a good indicator of the DSP bandwidth.  
  The exact bandwidth and/or high-cut, low-cut frequencies (or 
  Shift/Width) are shown in the VFO B display when a change is made.   I 
  think what you are requesting is already there.

  73,
  Don W3FPR

  On 11/29/2011 9:08 PM, ANTHONY JAPHA wrote:
  > It would be great if the power level for the instant band was shown on the display.  Particularly so for users who use different power levels on the various bands.  Another thing that would be good to show is the bandwidth in use, not only the filter selected.  Maybe both.
  > Tnx and 73,
  > Tony, N2UN
  >
  ______________________________________________________________
  Elecraft mailing list
  Home: http://mailman.qth.net/mailman/listinfo/elecraft
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:Elecraft at mailman.qth.net

  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html