[Elecraft] Diversity mode preamp

[Jim Brown]

On 11/22/2011 10:06 AM, ab2tc wrote:
> But that sequence must have serial command equivalents which could then be
> supported by logging programs or made into a button macro. Making a macro
> that turns on or off both preamps or both attenuators also ought to be easy.
> The important thing is that it is a specific series of commands or button
> presses that have no side effects beyond the intended operation.

This might lead to a solution, Knut.  The first  question is, are there 
commands in firmware to do what Tom needs?  I'm pretty N1MM will send a 
command string on the serial port (including a USB converted serial), 
and the operation could be assigned to almost anything on the keyboard 
with a Hotkey program like the one that K1TTT and N2IC recommend.  Is it 
called AutoHotKey?  An example that I KNOW is possible is triggering the 
DVR memories from F-Keys. The macros to do this are long and a PITA to 
type into N1MM, but they work fine.

Tom -- perhaps ask about this on the N1MM list, or ping N2IC and K1TTT 
directly.

73, Jim K9YC