[Elecraft] SLUSB and K3

[David Herring]

Hey Joel,

Since you have used the SLUSB with the Yaesu, have you cross-referenced the jumpers across the jumper block inside the SLUSB with the K3 cable to make sure that the jumpers are putting the signals out on the right pins for said K3 cable?  

I have never used a Yaesu cable or a commercial K3 cable with the SLUSB (I made my own cable using a cat-5 ethernet cable), so this may be a moot suggestion, but then on the other hand, it would not be the first time that cables from the same manufacturer required a different pin out...

73 & Aloha,
Dave, AH6TD


On Nov 19, 2011, at 8:54 AM, Joel Black wrote:

> Sorry, I failed to mention that I am familiar with setting up the 
> SLUSB.  I used it with my FT-857.  That was my oversight for not 
> mentioning it.  I'm just trying to get it working with the K3.  I'm just 
> missing something.
> 
> The E-MU 0204 is working FB right now with the K3 so I know the audio 
> I/O works on the back with a soundcard.  It's just going to take me 
> getting the right combination.  However, the 0204 is going to be my 
> panadapter input so I will need to figure out the SLUSB.
> 
> I appreciate all the helpful suggestions.
> 
> Again, my apologies for cross-posting.
> 
> 73,
> Joel - W4JBB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html