[Elecraft] K3 SSB help

[Joe K2UF]

Thanks to all who tried to help me with this problem.  Everything that you
guys suggested I either made the change or already had the settings correct.
Nothing corrected the problem.  The ALC reading is always full scale even
with MIC and CMP both set to zero.  I sent an email to K3support but don't
expect to hear from them until Monday.  May have to pull the old MP1000
field out of moth balls for the SS SSB.  Guess I should have tried to set it
up earlier this week (UGH!).

Thanks again to Mike, Greg, Mark, Bill and Jim for their help

73  Joe K2UF

No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Joe K2UF
Sent: Friday, November 18, 2011 9:57 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 SSB help

I am trying to get my K3 set up for SS SSB.  I am in test mode. I have
selected CMP/ALC. CMP is set to 0.  The MIC control has no affect on the ALC
reading it is always at full scale.  I must be missing something. Any help?

Joe K2UF

No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html