[Elecraft] PSE HELP: K3+N1MM+MMTTY

Sante - IK0HBN ik0hbn at libero.it
Wed Nov 16 10:14:03 EST 2011


Thank you Joe,
I suspected this..
The reason of the last message, is that we are not able to set a 
fresh bought Micro Keyer 2 since a week, so we thought to "trash 
away" it and reverting back to simple cables set.
Any of you has the combo K3 + Micro Keyer 2 and wish to help us?
CW, MMTTY and MMVARY with N1MM at last had been set.

Manual is based on an old version of N1MM and MMTTY , so the several 
pictures shown on manual are useless to set the program.We lost into 
AUDIO label in Config menu.
We are not able to route VOICE to N1MM with the purpose of recording 
messages and seeing them played back to radio. My friend spent also 
money for cables!!! No help from Microham support till now.
TIA
Sante



At 15.20 16/11/2011, Joe Subich, W4TV wrote:

> > I need to know if there is a way to go out in TRUE FSK using the CAT
> > cable Computer-K3.
>
>No.  FSK requires an on/off keying (shift) signal connected to the
>proper pin on the ACC (DB15HD) connector.
>
>73,
>
>    ... Joe, W4TV
>
>
>On 11/16/2011 6:36 AM, Sante - IK0HBN wrote:
>>Hi All,
>>one of my friend have given several days ago the duty of setting his
>>K3 with N1MM and MMTTY. Surely it's a good start for me with this
>>radio, but as at moment I'm not an owner of such a cake, I need your help.
>>
>>Purpose: Using K3 with a single True Serial cable to manage FSK, CW
>>and triggering DVK Voice message of K3. This radio has been purchased
>>with its internal DVR and I found the G4IFB posting useful to trigger
>>DVR memories (http://www.g4ifb.com/html/elecraft_k2_k3.html#TrigerDVR).
>>
>>I need to know if there is a way to go out in TRUE FSK using the CAT
>>cable Computer-K3. I read that CW should be possible, even if CW will
>>not be brillant for the delays of WinXP multitasking.
>>
>>Thank you
>>Sante
>>
>>______________________________________________________________
>>Elecraft mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: mailto:Elecraft at mailman.qth.net
>>
>>This list hosted by: http://www.qsl.net
>>Please help support this email list: http://www.qsl.net/donate.html



More information about the Elecraft mailing list