[Elecraft] K3 audio problem at T2T
Eric Swartz - WA6HHQ, Elecraft
eric at elecraft.com
Mon Nov 14 16:07:08 EST 2011
If they are using a condenser mic, make sure the mic boas is turned on.
73, Eric
---
www.elecraft.com
On 11/14/2011 1:02 PM, Greg wrote:
> Garry,
>
> I am not at home right. Using another radio's config file will probably
> not work as the calibrations would be different between the two rigs.
>
> If you can get them on the air or by email I would suggest doing the EEINIT
> process and then redo the calibrations outlined in the manual (watt meter,
> TX Gain, VCO CAL and Ref CAL). It should not take them more than 15-20
> min. They will also have to resetup their filter settings and activate
> whatever options they have in the CONFIG menu.
>
> No guarantee this will work but considering the urgency it is probably the
> first best bet to try.
>
> 73
> Greg
> AB7R
>
>
>
> On Mon, Nov 14, 2011 at 12:27 PM, Garry Shapiro<garry at ni6t.com> wrote:
>
>> Just spoke to VK4FW at T2T. One of their K3's works on CW but has died
>> on SSB. Bill says they disconnected all cables, set all settings to
>> match another K3 that is working on SSB, checked the microphone routing
>> on the Main Menu and of course swapped out headsets. No joy. They are
>> frantic to get it working and are at this moment on 24945 SSB listening
>> 5 up. If any of the Brain Trust can help, please do. It's 2026Z.
>>
>> Garry, NI6t
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list