[Elecraft] Accessory Build order

[Don Wilhelm]

Fred,

Those options can be installed in any order.  Look at your operating 
situation to decide which to install first.  For instance, if you are 
currently using a manual antenna tuner and would like to automate the 
tuning, add the KAT2 first. If you are interested more in SSB and 
digital modes, then install the KSB2 first.  If you are plagued with 
impulse noise (like automotive ignition noise), then the KNB2 would be a 
better first addition, but if you want to operate with rig control 
software applications, then the KIO2 will be on the list of "soon to be 
added" options.

Bottom line is that it all depends on what capabilitiies you want for 
your K2 right now and for the future.
Gee, 2 years of excitement with the basic K2, and you have already 
purchased the options - that does not sound like the typical K2 builder 
who wants everything all at once.  I congratulate you on your patience 
and your enjoyment with the basic K2.

73,
Don W3FPR

On 11/11/2011 7:51 PM, KC9QQ wrote:
> I hope this is a simple question.
>
> I built my K2 nearly two years ago and it has been working flawlessly.
> After I completed the construction and alignment of the base unit I had
> planned to build and install the KSB2, KDSP2, KNB2, KIO2, and KAT2
> (purchased with the original K2).  I was so pleased with the performance of
> the basic radio for QRP CW operation that I never got around to building and
> installing the other kits.
>
> Is there a preferred order I should follow for building and installing the
> above kits?  If so, all advice and opinions are welcomed.  This should make
> a nice project for one of our Indiana snow storms this winter.
>
>