[Elecraft] K2 disassemble/ maint. question

[Carey Magee (K2RNY)]

Hi Jacob:

It was a while ago when I did mine, but I recall only having to remove the front panel assembly.  The headphone jack was right there on the left of the main board looking at the front of the rig.



73, 
Carey 
  
Mr. Carey Magee, K2RNY 
Rochester, NY 
http://www.qrz.com/db/k2rny 
================================== 

----- "jacob chambers" <chambersjacob at yahoo.com> wrote:

> Group;
> 
> I have a new headphone jack to put into my rig. I am looking at the
> manual and it seems I'll have to take all the boards out (RF, control,
> options, etc) to get to the front panel board. Is this right, or is
> there perhaps an easier way - like just taking the front panel off
> straight away? I didn't build the K2, alas, or I'd likely know this. 
> 
> Thanks for advice! 
> 
> 73;
> Jacob K4JQV 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html