[Elecraft] Failure to connect with Elecraft server

[Don Wilhelm]

Charles,

The Edgeport/4 that I mentioned connects with a USB cable, you should 
have USB ports on your laptop.

73,
Don W3FPR

On 11/9/2011 4:08 AM, Charles wrote:
> Hi Don,
> Thanks again for your prompt reply.
> Not all laptops available today have a card slot.
> I am using the ACER 5724Z which does not have a card slot.
>
> Referring to page 21 of the KPA owner's manual, I am using the KPA/K3 AUX
> Cable.
> If I want to upgrade the firmware on all three units (K3, P3, and KPA) then
> can you or Elecraft recommend a permanent configuration of serial cables
> that will enable such a requirement?
> It seems to me that if there is no answer to my last question then I will
> need to change the serial cable connections for each unit every time that
> I need to upgrade the firmware. The alternative is to take the advice of
> Fred Cady on page 247 of his excellent manual.
>
> Many thanks once again for your valuable help Don.
> 73 from Charles - M0BIN
>
>