[Elecraft] K3 TX Gain troubles on 6m

[W0MU Mike Fatchett]

This was measured on the K3 doing the TX gain adjustment.  It fails and 
gives an error message.

Mike W0MU

J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net


On 11/8/2011 11:01 AM, n6ax at speakeasy.net wrote:
> Mike...do you have confidence in your power meter's accuracy? (or was the power
> measured on the K3?
>
>
> John
>
>
>
>
> On Tue Nov  8  9:46 , W0MU Mike Fatchett<w0mu at w0mu.com>  sent:
>
>> I have emailed support but was curious if others have seen this issue.
>>
>> I was seeing a few spikes on the KPA500 so I decided to do the TX
>> Calibration.  I have all the bands in good order except for 6m where the
>> output will not go above 3.6 watts on the 5W calibration or above 48ish
>> on the 50watt.
>>
>> I am going to try another cable and dummy load just for curiosity.
>>
>>
>> -- 
>> Mike W0MU
>>
>> J6M CQ WW DX CW Contest 2011
>> J6/W0MU November 21 - December 1 2011
>> W0MU-1 CC Cluster w0mu.net
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>