[Elecraft] K3 TX Gain troubles on 6m

[W0MU Mike Fatchett]

I have emailed support but was curious if others have seen this issue.

I was seeing a few spikes on the KPA500 so I decided to do the TX 
Calibration.  I have all the bands in good order except for 6m where the 
output will not go above 3.6 watts on the 5W calibration or above 48ish 
on the 50watt.

I am going to try another cable and dummy load just for curiosity.


-- 
Mike W0MU

J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net