[Elecraft] K2 DOA at second power up test

[ke4d]

Thanks Don, Elecraft told me the same thing. However, as I told them, I'm on
the second power up test in the manual, there is no T3 or PA transistor in
on the board at this time.  I've built the front panel, the control board
and the receiver, no transmitter yet. I'm pretty sure its something in the
12v line, I just can't find it. I wondered about F1 but I show 12 volts on
both sides of it so I guess its ok. And the power supply is fine, I have 12
volts on the RF board until I push the on switch on my front panel. Then the
voltage drops to about 2.5.  I figure something is pulling it down, I just
need to find it!  Thats what I get for building when I have to have my
magnifying glasses on the see anything on those boards!

--
View this message in context: http://elecraft.365791.n2.nabble.com/K2-DOA-at-second-power-up-test-tp6972220p6972425.html
Sent from the Elecraft mailing list archive at Nabble.com.