[Elecraft] K3 external reference

[Edward R. Cole]

Max,

I am using a Morion MV62 OCXO with good results.  I do not know 
whether it is similar to the model MV89 but you can view my website 
for info how I installed it.  I feed four radios by use of the DEMI 
10-4 10-MHz distribution amp (currently serves the K3EXREF, DEMI 
1296-28, and 10.470/0.470 MHz HB Tx converter).  One thing I like 
about the DEMI 10-4 amp is the narrow output filters which clean up 
the raw output of the Morion.
http://www.kl7uw.com/Rubidium.htm
http://www.kl7uw.com/K3EXREF.htm
------------------------------

Message: 19
Date: Mon, 07 Nov 2011 16:17:57 +1300
From: Max Kempson <maxkempson at clear.net.nz>
Subject: [Elecraft] K3 external reference
To: elecraft at mailman.qth.net
Message-ID: <000f01cc9cfb$d8d4c990$8a7e5cb0$@net.nz>
Content-Type: text/plain;       charset="us-ascii"

Is anyone using the Morian OCXO MV89A 10MHz oscillator as a feed to the
external ref unit? If so how are you using it.

Thanks

Max/ZL4VV



73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
EME: 50-1.1kw?, 144-1.4kw, 432-QRT, 1296-?, 3400-?
DUBUS Magazine USA Rep dubususa at gmail.com
======================================