[Elecraft] Elecraft T1 Miniature ATU / BL2

[Wayne Burdick]

Hi Randall,

You can connect a random wire antenna directly to the T1 (then toss it  
into a tree, etc.) without a feedline. But you'll need to add a ground  
counterpoise wire, too; use at least one wire cut to 1/4 wavelength on  
the lowest band in use.

If you want to run a balanced feedline to the antenna, then a BL1 or  
BL2 would be required. The counterpoise or ground wire may then be  
optional, but is still recommended.

73,
Wayne
N6KR


On Nov 6, 2011, at 5:59 PM, Randall wrote:

>
> I'm assuming when using the Elecraft T1 Miniature ATU with a wire  
> antenna,
> dipole or long wire, the BL2, 1:1 & 4:1 (switched)  Balun, is  
> required.
> Is this correct ?
>
> thanks
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html