[Elecraft] K3 Beta 4.42 and LP Bridge

[k5oai]

I may need to clarify...
I meant the K3 port on the computer is a serial port not using a USB.

Also I am using DXLabs not HRD, so I can not address any agc issues, pro or
con.

My post is simply to inform about the problem of running PowerSDR/IF or NaP3
while running S Meter Lite as one of the virtual ports of LP-Pan Bridge
v0.994
and K3 Beta v4.42

73 & GB
K5OAI
Sam Morgan


k5oai wrote:
> 
> 
> wayne burdick wrote:
>> 
>> The latest K3 firmware revisions include a high-accuracy S-meter  
>> command ("SMH") that was targeted at the S-meter Lite application.  
>> It's possible that other apps are using it, too, and trying to poll  
>> for it too fast. In any case, Larry and I will investigate.
>> 
> 
> FYI, great improvements, thanks for all the work,
> but I fear I bare bad news, it's also a case of 2 steps forward and 1 step
> back.
>  
> Pro's:
> I'm using LP-Bridge, v0.0.994 and S Meter Lite v2.22 with K3  beta 4.42
> S-meter Lite now works great, with no freezing like  it previously
> displayed.
> 
> Con's:
> Now I can NOT use either PowerSDR/IF v1.19.3.5 or NaP3 beta 2.
> As soon as I start either pgm, S Meter Lite starts drawing a straight
> line, 
> at the signal level last seen before I started either sdr pgm.
> As soon as I close the sdr pgm S meter Lite resumes working as before.
> 
> I use a softrock with the if out of the K3 feeding a Delta 44 soundcard,
> all ports are real serial ports, no usb involved.
> 
> 73 & GB
> K5OAI
> Sam Morgan
> 


--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-Beta-4-42-and-LP-Bridge-tp6961160p6968573.html
Sent from the Elecraft mailing list archive at Nabble.com.