[Elecraft] Loose buttons
Don Wilhelm
w3fpr at embarqmail.com
Fri Nov 4 16:30:45 EDT 2011
Dragan,
Yes, putting some non-conductive material about the thickness of a PC
board is the solution.
Use some glue between whatever you material you use and the Front Panel
board. The material should ideally have some flexibility - like rubber
or nylon, but a stiff material (like a small square cut from PC board
backing) will work too. Nothing fancy, but it does need to be present
to keep the buttons from moving inward when they are not pressed.
Yes, your label 'A' points to a 2D connector.
73,
Don W3FPR
On 11/4/2011 4:15 PM, Dragan 4O4A wrote:
> Hi Don,
>
> Thanks for prompt answer.
>
> Please take a look at image here: http://www.desniklik.com/k3-4o4a.jpg
>
> Is "A" a 2D connector you are referring in your message?
> (sorry, I can't find proper English word for the "A")
>
> There is some gap between PCB and "A", as tick as PCB is.
> PCB is moving when I press button.
>
> What do you think about gluing some non-conductive piece of material
> (another rubber) on the side of "A", to fill the gap?
>
>
>
>
> On 4.11.2011 20:34, Don Wilhelm-4 [via Elecraft] wrote:
>> Dragan,
>>
>> The other buttons do not move.
>>
>> I suspect that the rubber spacer pad between the front panel board and
>> the 2D connector on the upper right corner of the K3 is not in place.
>> You can see the 2D connector if you open the top cover and look - the
>> spacer pad should also be seen on the front panel board.
>>
>> One of the problems with those pads is that often the "sticky substance"
>> peels off onto the backing paper instead of sticking to the pad. If
>> that happens, the pad will stick for a short wile because of some
>> residual "sticky stuff", but it will eventually come loose. If you find
>> the pad loose in your K3, you can re-apply it with most any kind of
>> flexible glue that will adhere to rubber, like a product called "Goop".
>>
>> 73,
>> Don W3FPR
>>
>> On 11/4/2011 3:15 PM, Dragan 4O4A wrote:
>>
>>> Hi all,
>>>
>>> Since this summer I am a proud owner of K3-10/F and don't want to waste
>>> bandwidth on my compliments to this great radio.
>>>
>>> I guess that I have a problem with loose buttons in upper right
>> corner of
>>> the front board.
>>> For example, if I press M>V button, other surrounding buttons are also
>>> moving. Is this normal behavior?
>>> If not, how to solve this?
>>>
>>> I didn't find any post that describes this kind of problem. OTOH, on
>> YouTube
>>> I found a couple of blurry demonstration videos and I thought I saw
>> that
>>> those buttons are not moving.
>>>
>>> Thanks,
>>> Dragan, 4O4A
>>> K3-10/F #5569
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>> </user/SendEmail.jtp?type=node&node=6963951&i=0>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>> ------------------------------------------------------------------------
>> If you reply to this email, your message will be added to the
>> discussion below:
>> http://elecraft.365791.n2.nabble.com/Loose-buttons-tp6963905p6963951.html
>> To unsubscribe from Loose buttons, click here
>> <http://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code&node=6963905&code=ZHJhZ2FuLmJhckBnbWFpbC5jb218Njk2MzkwNXwyNDI1NTIxMDE=>.
>>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/Loose-buttons-tp6963905p6964047.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the Elecraft
mailing list