[Elecraft] K3 Beta 4.42 and LP Bridge

[Don Wilhelm]

For what it is worth, Wayne said that beta helped the problem with HRD 
turning off the K3 AGC.
My understanding is that this is not a problem with HRD when LP-Bridge 
is in the picture too - but then I am going only by the few reports that 
I have seen in passing.
As far as I know, the AGC off problem only occurs with HRD connected 
directly to the K3 and not through LP-Bridge.

You might want to also post your problem to the LP-Pan Yahoo group - 
that is where most of the questions related to LP-Bridge are aired.

73,
Don W3FPR

On 11/3/2011 7:54 PM, ai6ii wrote:
> Downloaded and install the new beta 4.42 for the K3 and have started getting
> a failure with LP Bridge "The object involved has disconnected from its
> clients" - the two clients are HRD on VCP#1 and Commander on VCP#2. LP
> Bridge stops interfacing with the K3 which in turn upsets HRD - it sends a
> message that it is no longer communicating with the K3.
>
> Anyone else run into this? I am gong to back off the beta and see if the
> problem goes away.
>
> ..mike AI6II
>