[Elecraft] Weak Signal Propagation Reporter WSPR software (need help with it)

[goldtr8 at charter.net]

HI Group,

I have it up and running.

I am amaized on how far your signal can be heard with only 1 watt WOW.

Now I have to work on that JP65 mode.

Don
KD8NNU


On Sun, May 29, 2011 at 9:16 PM, John Ragle wrote:

> These are the settings I have used...
>
> To run WSJT on K3 with SignaLinkUSB:
>
> (The soundcard settings that FLDIGI takes care of automatically, when 
> set up, must be done MANUALLY in WSJT. Otherwise, the setup is the 
> same.)
> 1.K3 in “TX DATA”
> 2.K3 at 50.260 (for six meter operation)
> 3.K3 with “CONFIG” “LINE OUT” ~ 20. This depends on Digital Gain 
> Setting on SpecJT (lower right-hand side).
> 4.SignaLink-USB ON
> 5.PC “Playback Devices” (right-click on speaker mini-icon) must have 
> “Speakers USB Audio Codec” as “Default Device”
> 6.PC “Recording Devices” must have “Microphone USB Audio Codec” as 
> “Default Device”
> (Items 5 and 6 are the soundcard settings, obviously)
>
> John Ragle -- W1ZI
>
> =====
>
> On 5/29/2011 8:17 PM, goldtr8 at charter.net wrote:
>> Would someone who is using the WSPR software share how they have the
>> setup configured for the K3.
>>
>> I can not get it to go to TX.  I have something wrong with either the
>> CAT or PTT settings.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html