[Elecraft] K3 shutdown

[Don]

That happens to me occasionally when I pull a little too much current from 
my old 20 amp power supply which goes into current limit, shuts down for a 
few milliseconds, and then starts again after the K3 has crashed.  It 
happens so fast that it is not apparent what has happened.

Just a thought.

Don K7FJ

-----Original Message----- 
From: John/K8AZT
Sent: Friday, May 27, 2011 8:25 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 shutdown

My K3 sn1693 has just started exhibiting a troubling problem.  Operation in 
CW
when I put key down, the rig shuts off completely.  When turning back on, it
forgets frequency that was set just prior to shut down.  I thought this 
might be
rf in shack, so tried with dummy load and same problem.

Any suggestions or has anyone else experienced this behavior?

73,
John/K8AZT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html