[Elecraft] Interface for MRP 40
nr4c
nr4c at widomaker.com
Tue May 24 10:31:57 EDT 2011
Thanks for this note. I had completely forgotten this capability. I
have to use a second RS-232 port for keying my rig due to software
restraints (N3FJP won't use same serial port for CW as CAT).
...bc nr4c
On Tue, 24 May 2011 15:24:25 +0100, Brendan Minish wrote:
> The requisite keying interfacing for DTR and RTS is ALREADY built
> into
> the K3
> you just need to enable it on the K3
> No need for any interface, just an RS232 cable
>
> On Tue, 2011-05-24 at 10:00 -0400, nr4c wrote:
>> To decode the CW signals, (no transmit) all you need do is use a
>> patch
>> cord (1/8 inch stereo both ends) from the LINE OUT on bacxk of the
>> K3
>> and connect to LINE IN or MIC IN on the computer sound card.
>>
>> For TX, see the uper partr of the schematic shown here:
>> http://www.polar-electric.com/Morse/MRP40-EN/IF.gif, the part with
>> the
>> opto-couplers. A patch cord from computer OUT to K3 LINE IN Will
>> get
>> you the audio. The K3 already has transformer isolated in/out on
>> the
>> LINE interface.
>>
>> ....bc nr4c
>>
>>
>> On Tue, 24 May 2011 09:34:11 +0100, Gavin Keegan wrote:
>> > I would like to use the MRP40 CW program with my K3 (1336)
>> connected
>> > to
>> > my laptop and need details of a suitable interface unit,
>> preferably
>> > homebrew. Can anyone help with either a design or details of a
>> > proprietarily made unit please? Gavin Keegan - G6DGK
>> >
>> > ______________________________________________________________
>> > Elecraft mailing list
>> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> > Help: http://mailman.qth.net/mmfaq.htm
>> > Post: mailto:Elecraft at mailman.qth.net
>> >
>> > This list hosted by: http://www.qsl.net
>> > Please help support this email list:
>> http://www.qsl.net/donate.html
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list