[Elecraft] KPA500 kit versus factory

[Ron D'Eau Claire]

No, other than the need for a 1/2" wrench to tighten the big bolt that holds
the power transformer in place the tools are similar to what you used on the
K3 including a DMM for a few resistance checks. 

The KPA500 does not have as many parts as the K3, but it's a carefully
engineered fit so it really only goes together smoothly one way; Following
the assembly instructions will be important if you don't want to waste a lot
of time. 

Ron AC7AC

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of John Grimm
Sent: Monday, May 23, 2011 9:19 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] KPA500 kit versus factory


I'm hoping that those receiving KPA500 kits this week might post some
assembly observations and thoughts on the assembly of the kit.  I'm curious
why there's more of a 'factory assembled versus kit' price premium with the
amp versus the basic K3.  Is there anything more complex required with the
KPA500 assembly versus a K3?  Any special test equipment or requirements
beyond those required to put together the K3?  Thanks all.  John / K0YQ  
 		 	   		  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html